Wall tie failure is a common problem, especially in older properties, and can cause major structural damage if not fixed correctly and quickly. But as always SkilledBuild has a top quality product and a step by step user guide to help you solve the problem yourself, without having to spend a fortune.

Wall ties are very important to a building's structural integrity as they 'tie' the inner and outer leaves of a cavity wall together to provide stability to the entire structure. Consequently, if they are not present or if they are inadequate there is a possibility that the outer wall could collapse. 

If wall tie failure has occurred the solution is to implement a wall tie replacement system. Our remedial wall ties are perfect for the job and they are inexpensive, fast, easy to use and provide a permanent solution. These helical ties are made from high quality stainless steel and carry a European CE Mark Approval so you can be assured that they are designed to last. They are also unobtrusive and simply screw into a wide variety of building materials when hammered into pilot holes. As the tie is driven into the substrate, the fins of the tie undercut the masonry to provide an expansion free anchorage which will withstand tension and compression loads, consequently restoring stability.

SpiraCoil Remedial Wall Ties can also be used for tying and pinning masonry to brick, block, concrete and timber.

Size:                                      9mm diameter

Length:

• 180mm for a 0-25mm cavity.
• 205mm for a 25-45mm cavity.
• 230mm for a 50-70mm cavity.
• 255mm for a 75-95mm cavity.

Packaging:                            They are supplied in bags of 50.

Applicator (Not Included):

• A remedial wall tie setting tool.
• A 6mm x 300mm SDS drill bit  for 180-230mm ties
• A 6mm x 450mm SDS drill bit  for 255-305mm wall ties
• A 7mm drill bit for tying into engineering bricks or structural concrete.