HA6 silicone sealant

HA6 is a premium, high modulus, non-shrinking, marine quality silicone sealant and adhesive - ideal for home aquariums, fish tanks and engineering applications.

It has been specially designed to be unaffected by UV, ozone, salt water immersion and extremes of temperature and is non-slumping in paste form.

HA6 also advantageously contains no fungicides or oils which can be leached into water and has geat durability characteristics.

Size: 310ml.

Shelf Life: Minimum 24 months in unopened cartridge.

Most Suited For:

Bonding, bedding and sealing glass in aquarium construction.
Manufacture of in-situ gaskets and seals for pumps and pipework to prevent water ingression.
Dust and weatherproofing seal for cabinets in dirty environments or external applications.
Glass.
Ceramics.
Anodised Aluminium.
Primed metals and timber.
Many plastics.

Not Suited For:

Concrete and cement surfaces.
Surfaces where water can penetrate through porous materials to the bond interface.

Certificates/Approvals: This product surpasses the requirements of ISO11600-F&G-25HM.

Applicator: Caulking gun

Size:

PVC Gloves.
Safety goggles / glasses.

Write your own review on HA6 SILICONE SEALANT

How do you rate this product?	Poor	OK	Good	Very Good	Excellent
How would you rate this product in terms of ease of use?
Please describe the product in terms of overall satisfaction
How would you rate the data supplied with this product?
How would you rate this product in terms of value for money?
How would you rate this product in terms of performance?

Review (Your detailed thoughts are always appreciated)

Ensure all surfaces are thoroughly clean and dry.
Apply using a standard caulking gun with the nozzle cut at 45^o angle and to an opening slightly larger than the joint to be sealed.
For sealing and bedding apply in normal fashion and tool to a smooth finish 1 to 2 minutes after gunning.
As an adhesive bring the two surfaces together before skinning commences and do not stress the joint before the silicone has developed strength.
As a gasket apply to one surface and if the joint is to be broken allow a strong skin to develop before compressing.
Clean away excess with white spirit.

This is only a short overview on how to use the product and does not cover all the necessary points. Therefore, please click the ‘Product Information Sheet’ link below for more information.

Product presents a low hazard in correct use.
Avoid eye contact. In the event of contact irrigate eyes immediately with plenty of cold, clean water for 15 minutes and seek medical attention.
Do not ingest. In the event of ingestion, do not induce vomiting, drink plenty of water and seek medical attention.
Thoroughly wash hands with soap and water or a proprietary hand cleaner after use.
Keep out of reach of children.
Some people are more sensitive to chemical products than others. If irritation occurs discontinue use.

Please click link below for a more in-depth safety analysis.