GRAFFITI REMOVER
Non-Toxic, safe and low odour graffiti remover.
Fed up of unwanted graffiti on your paint or brickwork?
In the past graffiti removal has been somewhat difficult, but with recent chemical advancements it can now be achieved quickly and effificently. Our GRAFFITI REMOVER is one of these advancements; its concentrated formula penetrates quickly into the graffiti which can then be removed simply by rinsing in soapy water or with the use of a pressure sprayer.
This product also has the added benefit of being safe, non-toxic and low odour.
Size: 1 litre.
Shelf Life: 2 years. Store in unopened original containers in cool, dry conditions between 5 & 30°C.
Most Suited For:
Removing:
- Biro.
- Permanent Marker Pen.
- Most Spray Aerosol Paints.
Applicator:
- Brush.
- Roller.
- Cloth.
Required H&S Products:
- Safety glasses / goggles.
- Gloves - for e.g. PVC gloves.
• Apply MEGASHINE GRAFFITI REMOVER to the problem area.
• Leave to soften for a few minutes, then use a brush or cloth to work it into the graffiti.
• Once the graffiti has solubilised wipe off.
• Apply a little MEGASHINE GRAFFITI REMOVER to clean cloth/paper towel to wipe any remaining smears off surface.
• Wash down treated surface with soapy water to remove residues.
This is only a short overview on how to use the product and does not cover all the necessary points. Therefore, please click the ‘Product Information Sheet’ link below for more information.
- This product is non-toxic and safe for use in normal conditions. However, it is good working practice when handling any chemical product to wear protective gloves and glasses.
- The dissolved graffiti may contain irritants.
- Avoid contact with eyes and skin. If contact occurs rinse with plenty of cold water. If symptoms persist get medical attention.
- Ensure adequate ventilation of the working area.
Please click link below for a more in-depth safety analysis.
Do I need to do a spot test before using MEGASHINE GRAFFITI REMOVER?
YES! We strongly recommend that you always test this product on a small inconspicuous area to determine suitability before application. Since all surfaces differ it is your responsibility to determine compatibility between the product and the surface.
I have applied MEGASHINE GRAFFITI REMOVER onto brick but it does not seem to be effective, what should I do?
On brick and porous materials a longer soaking time may be required. It may also be necessary to repeat the process for thick or stubborn graffiti. In addition, please note that some small residual paint spots can be expected on porous surface.
Standard delivery rates and times apply for this product.
MEGASHINE uPVC SOLVENT CLEANER
MEGASHINE - uPVC CREAM CLEANER
STEALTH UV SAFETY GLASSES - SMOKE