• Ensure all surfaces are structurally sound, thoroughly clean and dry.
• Make good all cracks, splits, small holes and flashings.
• Carry out adhesion test prior to application to determine if use of primer is necessary.
• DO NOT THIN.
• Apply SealAcryl.
• SealAcryl can be applied in one coat, however, a 2 coat application ensures a greater uniformity of coating thickness.

This is only a short overview on how to use the product and does not cover all the necessary points. Therefore, please click the 'Product Information Sheet' link below for more information.

• Flammability: Flammable, Store away from heat, flames and sources of ignition.
• Skin Contact:  Contains solvents that cause de-fatting of the skin and, in extreme circumstances, dermatitis. Avoid contact by careful working and use of a barrier cream on hands, arms and other exposed areas or wear gloves. Remove skin contamination immediately with a proprietary hand cleaner and wash with soap and water.
• Eye Contact: Avoid contact. Could have an irritating effect. In the event of accidental contact, wash eyes immediately with clean water for 15 minutes and obtain medical attention.
• Inhalation:  Contains solvent. Stand upwind of the work to avoid inhalation. Switch off all working ventilation inlets prior to using the material; leave covered until there is no odour of the solvent in the vicinity. In the event of discomfort as a result of inhalation move person to fresh air. If discomfort persists seek medical advice.
• Oral Ingestion: With proper handling this should not occur. The possibility can be minimised by not consuming food in the working environment and by washing hands thoroughly before eating, drinking and smoking.
• Spillage: Spilt material should be mopped up immediately with an inert absorbent material, such as sand, and disposed of in accordance with regulations.
• Disposal of Containers: Do not leave containers on site where residue could be a hazard to children, animals or the environment. Replace lids securely and remove any containers to a central disposal point.

Please click link below for a more in-depth safety analysis.

How Long is the drying time?

Drying time is normally 24 hours dependant on ambient temperature and ventilation.

How many coats of SealAcryl should I apply?

It can be applied in one coat, however, experience has shown that a two coat application ensures a greater uniformity of coating thickness.

Standard delivery rates and times apply for this product.